Sony MHC-V77DW - Back Panel Section

MHC-V77DW
17
2-10. BACK PANEL SECTION
clamp
2CH DAMP board
:LUHVHWWLQJ
rear
side
–7RSUHDUYLHZ–
9 CN1002 (2P)
7 two screws
(+BVTP 3 u 8)
6 two screws
(+BVTP 3 u 8)
1 two screws
(rivet (DIA. 3), nylon)
3 one screw
(rivet (DIA. 3), nylon)
2 cover, jack
4 cover, LAN
5 one screw
(+B 3 u 6)
qa panel, back section
8 Wire is removed
from the clamp.
0 wire (flat type)
(9 core) (CN6402)
Note 2: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
Insert is shallow
Insert is straight
to the interior.
connector
Insert is incline
connector
connector
connector
connector connector
Note 1: When installing the wire (flat type), ensure that
the colored line is not slanted after insertion.
colored line
colored line
Insert is straight to the interior. Insert is incline
wire (flat type) wire (flat type)
connectorconnector
OK
NG
OK NG NG