EasyManua.ls Logo

Sony MK7807V1 - Analog; Bkpf-021; Bkpf-205; Bkpf-206

Sony MK7807V1
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supplied Accessories
Operation manual (1)
Installation manual (1)
Optional Accessories
RMM-30 Rack Mount Rail
Optional Boards
BKPF-012A 525-line component digital to
NTSC composite analog/digital video
converter board
BKPF-021 NTSC Composite Digital to
525-Line Component Digital Video Converter
Board
BKPF-205 Audio/Video Multiplexer Board
BKPF-206 Audio/Video Demultiplexer Board
BKPF-300 Digital Video Selector Board
BKPF-301 Analog Video Selector Board
BKPF-350 Digital Audio Selector Board
BKPF-351 Analog Audio Selector Board
BKPF-R70A Routing Switcher Controller
Board
Optional Software
BZR-IF310 S-BUS SUB-NET Controller
Software
Optional Peripherals
BKPF-PS300 Backup Power Supply Unit
Specifications
Output
STATUS OUT:
D-sub 25-pin connector (1)
General
Power requirements:
100 to 240 V AC, 50/60 Hz
Power consumption:
600 VA max.
Maximum power supply capacity:
+5 V DC: max. 23 A
For installed boards -5 V DC: max. 23 A
Operating temperature:
5 to 40 °C (41 to 104 °F)
Storage temperature:
-20 to +60 °C (-4 to +140 °F)
Operating humidity:
10 to 90%
Dimensions (W x H x D)
424 x 310 x 450 mm
(16 3/4 x 12 1/4 x 17 3/4 inches)
Mass:
Approx. 18 kg (39 lb 11 oz)
(not including the optional boards)
The total power consumption of the14 installed
function boards should not exceed 23 A at 5 V
and 23 A at -5 V.
BKPF Series boards provide a wide range of audio and
video signal processing and distribution functions for
analog and digital signals. The PFV-D300 digital video
interface unit accommodates up to 14 of these boards,
providing an interface for system connections. One of
these boards can be a BKPF-500, providing an interface
to an ISR system. The PFV-D300 supplies power to the
boards, an optional BKPF-PS300 backup power supply
can be installed for critical applications. BNC connectors
for a looped video reference signal input and S-BUS
remote control are provided, together with an ISR Status
Out connector. The PFV-D300 mounts into a standard
19-inch rack and is 7U high.
Features
* Accommodates and powers fourteen BKPF Series
boards * S-BUS control and reference video connectors *
Redundant power supply option * Supports ISR
120
Interface Processor D Series
Interface Processor D Series
PFV-D300 Digital Video Interface Unit
Rear Panel
*SGC_0117-0132 02.3.16 5:05 PM Page 120

Table of Contents

Related product manuals