Chapter 11 Setup Menus
Chapter 11 Setup Menus 11-7
B01 RECALL BANK 1 Set to “on” to recall menu settings from menu bank 1.
B02 RECALL BANK 2 Set to “on” to recall menu settings from menu bank 2.
B03 RECALL BANK 3 Set to “on” to recall menu settings from menu bank 3.
B11 SAVE BANK 1 Set to “on” to save current active menu settings to menu bank 1.
B12 SAVE BANK 2 Set to “on” to save current active menu settings to menu bank 2.
B13 SAVE BANK 3 Set to “on” to save current active menu settings to menu bank 3.
B20 RESET SETUP Set this item to “on” to return the current menu settings to the factory defaults.
Set it to bank-4 to use the contents of menu bank 4 as the current menu settings.
For details about menu bank 4, refer to the Maintenance Manual.
Item number Item name Settings
Item number Item name Settings
037 LAST ERROR LOG
NUMBER DISPLAY
Specify whether the number of errors should be displayed as part of
superimposed text information.
The number of errors is displayed to the right of time data as a value like “E01”.
When the number of errors exceeds 99, it is displayed as “E--”.
OFF : Do not display the number of errors.
ON: Display the number of errors without blinking.
BLINK: Display the number of errors, and indicate errors by blinking.
(The display blinks during the error and for 5 seconds afterwards.)
To Next Page
Loading...
