Sony MVS-6520 - Page 171

USO RESTRITO
Three-Dimensional Transformation Operations 171
Button
Usable
coordinate
space
Trackball
X-direction
Trackball
Y-direction
Z-ring
SHIFT
+ ROT
Source,
target
Rotate
image on
Y-axis
(Spin
mode)
Rotate
image on
X-axis
(Spin
mode)
Rotate image
on Z-axis
(Spin mode)
AXIS
Source
Move X-
axis of
rotation
Move Y-
axis of
rotation
Move Z-axis
of rotation
LOC
SIZE
Source,
target
Move
image on
X-axis
Move
image on
Y-axis
Shrink and
magnify
image
ASP
PERS
Source
Change
aspect
ratio on X-
axis
Change
aspect
ratio on Y-
axis
Change aspect
ratio on X- and
Y-axes
simultaneously
Target
Shift
viewpoint
on X-axis
Shift
viewpoint
on Y-axis
Change
distance from
viewpoint to
image
SHIFT
+ ASP
PERS
Source
Change
skew on X-
axis
Change
skew on Y-
axis
Change aspect
ratio on X- and
Y-axes
simultaneously
Chapter
10
DME
Operations
Functions assignable to trackball and Z-ring operations
Type of three-
dimensional space
a)
Operation mode for
three-dimensional
transforms
b)
Value of X
Value of Y
Value of Z
a) This shows one of Local Target, Local Source, Global
Target, and Global Source.
b) This shows one of Loc XYZ, Loc Size, Rot, Spin, Axis, Skew,
Asp, and Pers.
Three-Dimensional Parameter
Display
You can check the values of the three-dimensional
parameters in the DME menu.
Displaying the three-dimensional
parameters in the DME menu
In the menu panel, select the [DME] top menu selection
button.
The DME menu appears. The status area shows the three-
dimensional parameters currently controlled by the device
control block.
• When multiple DME channels are selected, this shows
the parameters for the reference channel.
• When both “Global” and “Local” are selected, the three-
dimensional parameters are shown for the channel (or
reference channel) for which the button is lit green.
Example three-dimensional parameter display (DME menu)
Viewing the three-dimensional parameter
details
In the DME menu, press the menu title button (the [DME]
in the upper left part of the screen).
The Status menu appears. This menu shows the three-
dimensional parameters for the DME reference channel
currently selected in the device control block.
Example three-dimensional parameter details
Entering Three-Dimensional
Parameter Values
In addition to setting three-dimensional parameter values
with the trackball and Z-ring, you can enter them directly
from the Flexi Pad.