Sony MVS-6530 - Page 10

1-6 (E)
MVS-6520
5. While closing the eject levers in the direction of arrow
1, push in the plug-in board.
6. Attach the extract PWB stopper assembly and the front
panel by reversing the installation steps of 2 and 3.
4. While the eject levers are opened as shown in the
illustration, insert the plug-in board into the board
guide rail.
MVS-6520/6530 option
Name of option Plug-in board Board name of the
front side
MKS-6570 DVP-55 board DVP
MKS-6550 FC-114 board FC
MVS-3000 option
Name of option Plug-in board Board name of the
front side
MKS-6550 FC-114 board FC
Eject levers
Plug-in board
Plug-in board
Eject lever Eject lever
11