pg. 38
Notice this one shows a single Switcher (SWR1), one panel (PNL1) and one DME (DME1). By the way,
DME1 refers to the DME chassis (or in the case of the MVS-7000X for boards in the switcher), it does not
refer to the number of channels you purchased. DME1 can have up to 4 channels of video processing. If
you have channels 5-8, you should also see DME2. Please note that you will NOT see the DCU (Device
Control Unit) on this page.
If everything looks good and you see all the parts you paid for, please press the DEFINE button. If you do
not see all the parts you paid for, please check the network connecting cables and the Unit/Group ID
settings described above.
To Next Page
Loading...
