Chapter 5 Wipes
319
Wipe Settings for Independent Key Transitions
a) See page 306.
Replicating the wipe pattern (Multi)
1
Press [Multi] in the Key1 Wipe Adjust menu, turning it on.
2
Set the following parameters.
a) See page 307.
Knob Parameter Adjustment Setting values
1 Aspect Aspect ratio
–100.00 to +100.00
a)
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally
1 to 63
2 V Multi Number of repetitions of pattern
vertically
1 to 63
3 Invert Type Replication layout
1 to 4
a)
To Next Page
Loading...
