Chapter 23 Setup Relating to Router Interface and Tally (Router/Tally)
1103
Router Interface Settings (Router Menu)
2
Turn the knob to set the following parameter.
a) When setting values 1 to 7 are selected: If the name is not set, the description name for “0”
appears.
If the description name for “0” is not registered either, the Type and No values appear.
3
In the <Alias Name Gp> group, press [Set].
This confirms the setting, which is reflected in the status area.
Notes
Transmit the description name selected here from the router.
Knob Parameter Adjustment Setting values
1 Gp No Group number of S-Bus
description name
0 to 7
a)
To Next Page
Loading...
