Sony MVS-8000X System - Page 112

Chapter 3 Signal Selection and Transitions
112
Signal Selection
Notes
You can use the rightmost button (number 12) as a [SIDE FLAG] button. In
this case, the shift button moves one to the left, to number 11, and the button
numbers are offset by one.
For details of the [SIDE FLAG] button, see “Cross-Point Settings (Xpt Assign
menu)” in Chapter 19 (Volume 3).
Button numbers when all 12 buttons are used as cross-point buttons.
When the SHIFT button is off:
When the SHIFT button is on:
SHIFT button
When the SHIFT button is off:
When the SHIFT button is on:
Button numbers when the rightmost buttons (12th buttons) are used as SHIFT buttons.
SHIFT button
SHIFT buttons