Appendix (Volume 3)
1128
Data Saved by [Setup Define] and [Initial Status Define]
Included in
Panel Setup
7326.8 Engineering Setup >Panel
>Operation >Custom Button
>CCP-9000 Button
All data relating to CCP-9000
Button menu
7326.9 Engineering Setup >Panel
>Operation >ButtonTally
All data relating to ButtonTally
menu
7327 Engineering Setup >Panel
>Maintenance
• Setting data for the following
buttons:
- [Screen Saver]
- [LCD Brightness]
- [LED Brightness]
- [Switch Brightness]
- [Touch Beep]
• Setting data for Initial Menu
7351 to 7355 Engineering Setup >DCU All data relating to DCU
7361 to 7367 Engineering Setup >Router/Tally All data relating to router interface
and tally interface
7371 to 7373 Engineering Setup >MPE All data relating to MPE
— — Data of Color Palette window
Included in
Switcher
Setup
7331
7331.1
7331.2
7331.3
• Engineering Setup >Switcher
>Config
• Engineering Setup >Switcher
>Config >M/E Output Assign
• Engineering Setup >Switcher
>Config >PGM Config
• Engineering Setup >Switcher
>Config >K-PVW Config
• All data relating to Config menu
• All data relating to M/E Output
Assign menu
• All data relating to PGM Config
menu
• All data relating to K-PVW
Config menu
7331.4 Engineering Setup >Switcher
>Config >User1-8 Config
All data relating to User1-8 Config
menu
7331.5 Engineering Setup >Switcher
>Config >Logical M/E Assign
All data relating to Logical M/E
Assign menu
7331.6 Engineering Setup >Switcher
>Config >DME Config
All data relating to DME Config
menu
7331.7 Engineering Setup >Switcher
>Config >Side Flags
All data relating to Side Flags
menu
7331.8 Engineering Setup >Switcher
>Config >Switch Timing
All data relating to Switch Timing
menu
7332 Engineering Setup >Switcher
>Input
All data relating to Input menu
7332.1 Engineering Setup >Switcher
>Input >Video Process
All data relating to Video Process
menu
7333.1 Engineering Setup >Switcher >
Output >Output Assign
All data relating to Output Assign
menu
7333.2 Engineering Setup >Switcher
>Output >Video Clip
All data relating to Video Clip
menu
7333.3 Engineering Setup >Switcher
>Output >V Blank/Through
Setting of [V Blank Mask], and
[Through Mode] setting data for
each output
Type Menu number Menu path Saved data
To Next Page
Loading...
