Appendix (Volume 3)
1140
Error Messages
Backup Clip is recording (–4). 2564:Frame Memory >External Device
>Backup to DDR/VTR
In the above menu, an external device is
recording clips.
FM DDR/VTR Backup/Restore
is running (–5).
2564:Frame Memory >External Device
>Backup to DDR/VTR
When [Backup Start] was pressed in the above
menu, a backup/restore operation was being
executed with the VTR/DDR.
Backup Invalid FM OutCh (–6). 2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if the specified frame
memory output channel cannot be used.
Specified FM OutCh was
locked (–7).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if the specified frame
memory output channel is locked.
Not enough free register area
for Backup or Restore process
(–10).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if there is not enough
space to carry out the backup.
Prepare failed, not any file was
found on this board (–11).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if no image is present.
Backup failed, not prepared yet
(–12).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if not yet ready.
Backup failed, Clip recall failed
(–13).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if All One Clip ID Recall
failed (internal processing error).
Prepare failed, Clip create
failed (–14).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if All One Clip creation
failed (internal processing error).
Prepare failed, insufficient Clip
id (–15).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Backup] is pressed,
this message appears if there are not enough
Clip IDs (internal processing error).
Icon Title Message Description
To Next Page
Loading...
