Sony MVS-8000X System - Page 1149

Appendix (Volume 3)
1149
Error Messages
Restore Restore failed, some Clip files
cannot be deleted on this
board (–8).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if the restore failed
because a clip file cannot be deleted.
FM 2nd board not exist (–9). 2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if there is no second
board.
Not enough free register area
for Backup or Restore process
(–10).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if there is not enough
space to carry out the backup.
Prepare failed, not any file was
found on this board (–11).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if no image is present.
Prepare failed, insufficient Clip
id (–15).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if there are not enough
Clip IDs (internal processing error).
Restore failed, Cannot find
symbol files on this tape (–18).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if a marker frame file was
not found.
ERROR (–19). Bad register
number.
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if Register Number is
invalid (internal processing error)
Restore failed, file name
already exist, try to rename but
unsuccessful (–20).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if renaming failed.
Cannot find the File Name
Data, please load the File
Name Data first (–21).
2565:Frame Memory >External Device
>Restore from DDR/VTR
In the above menu, when [Restore] is pressed,
this message appears if the file list was not
loaded.
Set Time/
Date
Error: Wrong Format. 7317: Engineering Setup >System
>Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
Icon Title Message Description