Chapter 7 Frame Memory
318
Still Image Operations
2
In the frame memory selection area, select the frame memory to be
assigned.
This creates the effect in the user region to which the selected frame
memory is assigned.
For details of the operating procedures, see “Selecting outputs (FM) and
target frame memory” (page 306).
3
Select the desired folder in the folder selection area.
By pressing [More] to switch the display, you can select from a maximum
of 12 folders.
Thumbnails of the files within the selected folder appear.
4
Turn the knob to select the register number in the user region.
Notes
To search for an empty register in the user region, use the numeric keypad
control block (see step 3 of “Recalling a Register” in Chapter 13 (Volume
2)).
5
Use the arrow keys or turn the knobs to scroll the thumbnail display of the
files.
6
Select the thumbnail of the files to be used for the keyframe.
7
If necessary, turn the knob to check the animation effect in the thumbnail
display.
8
Using the region selection buttons in the numeric keypad control block,
select one of the regions (User1 to User8) to which the frame memory
output signals have been assigned.
9
Carry out either of the following.
Knob Parameter Adjustment Setting values
5 Register Effect register number 1 to 99
Knob Parameter Adjustment Setting values
1 Scroll Thumbnail display
scrolling
1 and upwards
Knob Parameter Adjustment Setting values
3 Viewer Animate thumbnail display
of files
00:00:00 and upwards
To Next Page
Loading...
