Chapter 8 Color Backgrounds, Copy and Swap, and Other Settings
362
Misc Menu Operations
1
In the <M/E-1 Transition Rate> group of the Misc >Transition menu, press
[Transition].
2
Turn the knob to set the number of frames.
Notes
When a clip transition is selected as the transition type, it is not possible to
change the transition rate in this menu.
To set the independent key transition rate
By way of example, the following is the procedure for settings of keys 1 to 4
in the M/E-1 block.
1
Press in the list in the status area of the Misc >Transition menu, to select
M/E-1.
2
In the <Transition Rate> group, press [Key K1-K4].
To insert (on) or remove (off) keys individually, press [Key(On) K1-K4]
or [Key(Off) K1-K4].
3
Turn the knobs to set the number of frames.
To set the fade-to-black transition rate in the Transition menu
Notes
This function is not available with the CCP-9000A.
1
In the Misc >Transition menu, press [FTB].
2
Turn the knob to set the number of frames.
Knob Parameter Adjustment Setting values
1 Transition Rate Transition rate 0 to 999 (frames)
Knob Parameter Adjustment Setting values
1 Key1 Trans Rate Key 1 transition rate 0 to 999 (frames)
2 Key2 Trans Rate Key 2 transition rate 0 to 999 (frames)
3 Key3 Trans Rate Key 3 transition rate 0 to 999 (frames)
4 Key4 Trans Rate Key 4 transition rate 0 to 999 (frames)
To Next Page
Loading...
