Chapter 2 Menus and Control Panel
52
Names and Functions of Parts of the Control Panel
a Next transition selection buttons
Press these buttons, turning them on, to
determine what the next transition will
apply to.
BKGD: Next transition changes the
background.
KEY1 to KEY8 (DSK1 to DSK8 in the
PGM/PST bank): Press this button,
turning it on, to make the next
transition insert or remove the
corresponding key (keys 1 to 8). If a
key is currently inserted it will be
removed, and vice versa.
In the PGM/PST bank, this inserts or
removes downstream keys 1 to 8.
For details of assignment and selection
of keys 5 to 8, see the following sections
in Appendix (Volume 1): “Assigning
Buttons for Selection of Keys 5 to 8 in
the Setup Menu” (page 459) and
“Selecting Keys 5 to 8 for Next
Transition” (page 460).
KEY PRIOR (priority): When this button
is lit, the setting of the key priority after
the next transition is enabled. The key
9 PRIOR SET button
1 Next transition selection buttons
8 Key status display
2 Transition type selection buttons
7 KF button
6 Pattern limit buttons
5 TRANS PVW button
3 Transition execution section
4 Wipe direction selection buttons
0 Independent key/downstream
key transition execution section
To Next Page
Loading...
