Chapter 11 DME Operations
530
DME Special Effect Operations
The setting range for the parameters depends on the signal format (SD/
HD) and aspect ratio (4:3/16:9) selected in the system, as follows.
•For SD format
a) For 4:3 mode
b) For 16:9 mode
Notes
When pattern number 304 is selected, the effect of settings in the <Edge>
group varies with the Size setting.
• For HD format
a) For 4:3 mode
b) For 16:9 mode
Notes
When pattern number 304 is selected, the effect of settings in the <Edge>
group varies with the Size setting.
To invert the regions of the cropping
In the Wipe Crop menu, press [Invert], turning it on.
Setting the aspect ratio of the wipe crop pattern (Aspect)
1
In the Wipe Crop menu, press [Aspect], turning it on.
2
Set the following parameter.
Knob Parameter Adjustment Setting values
1 H Horizontal position –8.00 to +8.00
2 V Vertical position
–6.00 to +6.00
a)
–4.50 to +4.50
b)
3 Size Pattern size 0.00 to 100.00
5 Pattern Pattern number 1 to 24, 304
Knob Parameter Adjustment Setting values
1 H Horizontal position
–24.00 to +24.00
a)
–32.00 to +32.00
b)
2 V Vertical position –18.00 to +18.00
3 Size Pattern size 0.00 to 100.00
5 Pattern Pattern number 1 to 24, 304
To Next Page
Loading...
