Chapter 11 DME Operations
546
DME Special Effect Operations
Gold: Give a gold gloss to the input video.
Silver: Give a silver gloss to the input video.
Rainbow: Give a rainbow color gloss to the input video.
Variable: Give a metallic gloss to the input video in any color by adjusting
the following parameters.
Masking the Metal effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see “Mask Settings” (page 548).
Dim and Fade Settings
Notes
The Dim and Fade functions are not supported on the MVE-8000A.
Applying the Dim effect
1
In the DME menu, select VF7 ‘Enhanced Video Modify’ and HF3 ‘Dim &
Fade.’
The Dim & Fade menu appears.
2
Press [Dim], turning it on.
This enables the Dim effect.
3
Set the following parameters.
4
Press [Flat Color] and set the parameters for the color of the depths of the
picture.
Knob Parameter Adjustment Setting values
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Start Point where dimming starts (dim
start point)
–100.00 to +100.00
2 Gain Degree of dimming 0.00 to 100.00
To Next Page
Loading...
