Sony MVS-8000X System - Page 559

Chapter 11 DME Operations
559
DME Special Effect Operations
Twist settings
You can twist the image in the horizontal or vertical direction.
You can set the size and frequency of waves in the image, the wave form, the
amount of wave movement, and other parameters.
To apply the Twist effect
With the Twist menu displayed, set the following parameters.
a) Set when Lock is on.
b) Set when Lock is off.
c) Setting for SD 4:3, SD 16:9
d) Setting for HD 4:3, HD 16:9
To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 Amp V Amplitude of twist in vertical direction 0.00 to 100.00
2 Freq V Frequency of twist in vertical direction 0.00 to 100.00
3
Offset V
a)
Amount of movement in twist phase
in the vertical direction
–16.00 to +16.00
c)
–64.00 to +64.00
d)
4
Speed V
b)
Speed and direction of twist
movement in vertical direction
–100.00 to +100.00
5 Slant Slant of twist –8.000 to +8.000
Parameter group [2/2]
Knob Parameter Adjustment Setting values
1 Amp H Amplitude of twist in horizontal
direction
0.00 to 100.00
3
Offset H
a)
Amount of movement in twist phase
in the horizontal direction
–100.00 to +100.00
5 Slant Slant of twist –8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Form H Waveform in horizontal direction
1 to 6
a)
2 Form V Waveform in vertical direction
1 to 6
a)