Chapter 11 DME Operations
588
DME Special Effect Operations
a) For SD 4:3
b) For SD 16:9
c) For HD 4:3
d) For HD 16:9
e) There are some nonlinear effects for which Angle cannot be used.
Bar shape parameters
Setting the color of the light in the highlight area
1
Turn [Light Color] on.
2
Adjust the following parameters.
Setting the bar shape of the shade area
When you select [Preset] in step 3 of “Applying the Lighting effect” (see page
586), use the following procedure to set the bar shape of the shade area.
1
Turn [Shade Modify] on.
2
Adjust the following parameters.
2 Y Y-value of bar center point
–6.00 to +6.00
a)
–4.50 to +4.50
b)
–18.00 to +18.00
c) d)
3
Angle
e)
Angle of bar –8.00 to +8.00
4 Width Width of bar 0.00 to 100.00
5 Soft Softness of edges 0.00 to 100.00
Knob Parameter Adjustment Setting values
Center point of bar
Bar width
Bar angle
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
To Next Page
Loading...
