Chapter 11 DME Operations
636
Global Effect Operations
• 16:9 mode
The part of the image defined by Top, Left, Right, and Bottom is magnified
or shrunk to fit into Side V or Side H.
To invert the image in a side face
For example, to invert the image on the front of Side H in the <Side H Front>
group, press the following buttons, turning them on.
Invert H: To invert horizontally.
Invert V: To invert vertically.
For the images on the other faces, use a similar operation in the following
groups:
• Back image of Side H: <Side H Back> group
• Front image of Side V: <Side V Front> group
• Back image of Side V: <Side V Back> group
Knob Parameter Adjustment Setting values
1 Top Position of top crop –2.12 to +2.25 (SD)
–8.50 to +9.00 (HD)
2 Left Position of left crop –4.00 to +3.87 (SD)
–16.00 to +15.50 (HD)
3 Right Position of right crop –3.87 to +4.00 (SD)
–15.50 to +16.00 (HD)
4 Bottom Position of bottom crop –2.25 to +2.12 (SD)
–9.00 to +8.50 (HD)
5 Rotation Angle of rotation, when rotated
around the Z-axis of the source
space
0/90/180/270°
Top side
Side V
Actual size, upper left corner
Set automatically
Cropped region
Crop Compress
Magnified or
shrunk to fit
Side
H
To Next Page
Loading...
