Chapter 13 Keyframe Effects
702
Recalling a Register
Recalling a Register
Use the numeric keypad control block to recall a register. For each region there
are 99 registers dedicated to keyframes, numbered from 1 to 99.
When creating an effect as a user programmable DME, use a 3-digit register
number which is commonly used for all DME regions (channels).
For a description of the concept of regions and registers, see “Regions” (page
680) and “Registers” (page 682).
Recalling a register from the numeric keypad control block
Numeric keypad control block
1
Press the [EFF] button, turning it on.
This allocates the numeric keypad control block to keyframe operations,
and the [RCALL] button lights.
2
Press the button corresponding to the region you want to select, turning it
on.
You can also press more than one button.
Display
Region selection buttons
RCALL button
UNDO button
EFF button
Numeric keypad
To Next Page
Loading...
