Chapter 15 Utility/Shotbox
779
Shotbox Execution
Shotbox Execution in the Utility/Shotbox Control Block
(MKS-8033 Utility/Shotbox Module, Option)
Utility/shotbox control block (MKS-8033)
In the utility/shotbox control block, as the default setting the memory recall
buttons have registers 1 to 96 allocated to banks 1 to 4.
1
Press one of the bank selection buttons [BANK1] to [BANK4] to select the
bank.
• The pressed bank selection button lights amber.
• The memory recall buttons show the names and states of the registers
corresponding to the selected bank.
Off: register in which nothing is saved
Lit orange: register holding shotbox settings
Lit yellow: last recalled register
Bank Register allocation to memory recall buttons
11 to 24
2 25 to 48
3 49 to 72
4 73 to 96
Bank selection buttons
Memory recall buttons
To Next Page
Loading...
