Chapter 16 Macros
830
Menu Macros
• Press directly on the menu macro register configuration list.
• Press the arrow keys on the right list to scroll the reverse video cursor.
• Turn the knob.
• To select all events, press [All Event Select].
4
If required, press [Auto Insert] to switch the auto insert mode on or off.
• When auto insert mode (see page 794) is on, a new menu is
automatically inserted after the event selected in step 3.
• When auto insert mode is off, skip to step 5.
5
Carry out the editing, using any of the following methods.
• To delete the selected event, press the [Delete] button.
• To overwrite the selected event, carry out the new menu operation, then
press the [Modify] button.
• To insert an event before the selected event, carry out the new menu
operation, then press the [Insert Before].
• To insert an event after the selected event, carry out the new menu
operation, then press the [Insert After].
6
With the same operation as step 7 of “Creating a new menu macro” (page
827), change the event execution interval.
7
With the same operation as steps 8 and 9 of “Creating a new menu macro”
(page 827) save the register.
Exiting the Menu Macro Edit menu without saving the results of
editing
In the Menu Macro Edit menu, press [Exit].
Scrolling event display using the menu macro listing
1
Move the cursor to the event you want to display.
2
Turn the knob.
Knob Parameter Adjustment Setting values
1 No Event number 1 and upwards
Knob Parameter Adjustment Setting values
2 H Scroll Scroll the characters in the
“Data” field.
1 and upwards
To Next Page
Loading...
