Chapter 19 Control Panel Setup (Panel)
964
Overall Control Panel Settings (Config Menu)
3
Using any of the following methods, scroll the display.
• Press the arrow keys.
• Turn the knob.
4
In the button indications on the left, press the button for the assignment.
5
Using any of the following methods, select the menu or action to be
assigned.
• Press directly on the right list.
• Press the arrow keys on the right list to scroll the reverse video cursor.
• Turn the knob.
6
Press [Set] you confirm the setting.
This assigns the menu or action selected in the list to the button.
To cancel an assignment, select the button, then press [Clear].
To return all button assignments to the factory default state, in the Menu
Panel menu, press [Default].
Assigning Keys to the Cross-Point Control Block Key
Delegation Buttons
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [CCP-9000 Key Deleg].
The CCP-9000 Key Delegation menu appears.
Four buttons appear for each of the M/E and P/P banks.
3
Press the button to which you want to assign a key, displaying it in reverse
video.
4
Using any of the following methods, select the key you want to assign from
the Button Assign list.
• Press directly on the list.
Knob Parameter Adjustment Setting values
1 Scroll Scroll 1 to 5
Knob Parameter Adjustment Setting values
3 Menu/Action Select the menu or action 1 to 43
To Next Page
Loading...
