Sony MVS-8000X SystemMVS-7000X System - Page 682

USO RESTRITO
682
Data Saved by [Setup Define] and [Initial Status Define]
Menu number
Menu path
Saved data
3211
Misc >Enable >Port Enable
<DME1> and <DME2> group data
4100
DME >Status
Three-dimensional transformation data
4111
DME >Edge >Border/Crop
All data relating to Border/Crop menu
4112
DME >Edge >Beveled Edge
All data relating to Beveled Edge menu
4121 to 4124
DME >Video Modify
All data relating to Video Modify menu
4131
DME >Freeze >Freeze
All data relating to Freeze menu
4141 (4141.1 to
4141.28)
DME >Non Linear/Corner Pin >Non Linear
All data relating to Non Linear menu
4151
DME >Light/Trail >Lighting
All data relating to Lighting menu
4152
DME >Light/Trail >Trail
All data relating to Trail menu
4153
DME >Light/Trail >Motion Decay
All data relating to Motion Decay menu
4154
DME >Light/Trail >KF Strobe
All data relating to KF Strobe menu
4161
DME >Input/Output >Bkgd
All data relating to Bkgd menu
4162
DME >Input/Output >Video/Key
All data relating to Video/Key menu
4163
DME >Input/Output >Process
All data relating to Process menu
4164
DME >Input/Output >Graphic
All data relating to Graphic menu
4211, 4221
Global Effect >Ch1-Ch4 >Combine Priority
Global Effect >Ch5-Ch8 >Combine Priority
All data relating to Combine Priority menu
4212, 4222
Global Effect >Ch1-Ch4 >Brick
Global Effect >Ch5-Ch8 >Brick
All data relating to Brick menu
4213, 4223
Global Effect >Ch1-Ch4 >Shadow
Global Effect >Ch5-Ch8 >Shadow
All data relating to Shadow menu
4113
DME >Edge >Key Border
All data relating to Key Border menu
4114
DME >Edge >Art Edge
All data relating to Art Edge menu
4115
DME >Edge >Flex Shadow
All data relating to Flex Shadow menu
4116
DME >Edge >Wipe Crop
All data relating to Wipe Crop menu
4117
DME >Edge >Color Mix
All data relating to Color Mix menu
4127
DME >Video Modify >Mask
All data relating to Mask menu
4155
DME >Light/Trail >Wind
All data relating to Wind menu
Appendix
(Volume
2)
Included in Switcher (Same as data saved in Snapshots)
Notes
In Multi Program 2 mode, M/E Config settings are saved
in a snapshot when [Recall M/E Config] is set to ON, but
are not saved by [Initial Status Define].
Menu number
Menu path
Saved data
—
—
• For each M/E, setting data relating to the following:
cross-points, transitions, Key1 to Key8 (including
settings in the independent key transition control block),
wipes, DME wipes, video processing
• Color backgrounds 1/2
• Frame memory
• AUX bus (including video processing and AUX mix
transition settings)
3211
Misc >Enable >Port Enable
Setting data for <Switcher> group
3213
Misc >Enable >Side Flags
All data relating to Side Flags menu
Included in DME