pg. 37
Network Config
This will take you to the ENG SETUP->System->Network Config Menu. We use this menu to make sure
everything is talking. This is also where we will see if all our Group and Unit IDs are set correctly.
Notice the purple buttons? Purple buttons are “execute” buttons. Most settings in the MVS menu are
immediate; you press the button and the setting changes. However, there are a few which need to not
be immediate, either because we need to confirm something, or MVS is waiting for several settings to
be changed and executed all at once.
Press the AUTO CONFIG button. You will get a dialog asking if you want to continue. Say OK. This
function will go out to the network and ask “who is there?” After a few seconds you should see
something like the following:
To Next Page
Loading...
