Chapter 19 Control Panel Setup (Panel)
1111
Overall Control Panel Settings (Config Menu)
The currently assigned function is displayed in the area that displays the
buttons in the selected control block.
5
Press a button to which to assign a function so that the button is displayed
in reverse video.
6
Using any of the following methods, select a desired function to be
assigned in the Button Assign list.
• Press directly on the desired list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
7
Press [Set].
The function selected in step 6 is assigned to the selected button.
To remove a function assignment
In step 5, select the button whose function assignment you want to remove, and
press [Clear].
The functions currently assigned to the
buttons in the selected control block
appear.
Button Assign list (Assignable
functions are displayed)
Knob Parameter Adjustment Setting values
1 Button
Assign No
Selection of a function to assign
to the selected button
1 to 15
To Next Page
Loading...
