Chapter 2 Menus and Control Panel
119
Basic Menu Operations
a) The menu recalled depends on which of the M/E-1 to M/E-4 banks and PGM/PST bank the
numeric control block is delegated to.
b) When other than [MASTR] is selected with the region selection buttons.
c) When [MASTR] is selected with the region selection buttons.
d) When the [SNAPSHOT] button or [EFF] button is set to On, or lit green.
a) The menu recalled depends on which of keyers 1 to 8 the downstream key control block is
delegated to.
b) Recalling is possible only when the [K-SS] button is On.
Downstream key control block
a)
Buttons Menus See
DSK1 • M/E-1, 2, 3, 4 >Key1 >XX
• PGM/PST >DSK1 >XX
page 217
DSK2 • M/E-1, 2, 3, 4 >Key2 >XX
• PGM/PST >DSK2 >XX
DSK3 • M/E-1, 2, 3, 4 >Key3 >XX
• PGM/PST >DSK3 >XX
DSK4 • M/E-1, 2, 3, 4 >Key4 >XX
• PGM/PST >DSK4 >XX
WIPE • M/E-1, 2, 3, 4 >Key1, 2, 3, 4, 5, 6, 7, 8 >Transition
>Wipe Adjust >Pattern Select
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Transition
>Wipe Adjust >Pattern Select
page 319
DME • M/E-1, 2, 3, 4 >Key1, 2, 3, 4, 5, 6, 7, 8 >Transition
>Wipe Adjust >Pattern Select
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Transition
>DME Wipe Adjust >Pattern Select
page 360
K-SS STORE
b)
Snapshot >Key Snapshot >XX Chapter 14
(Volume 2)
Auxiliary bus control block
Buttons Menus See
FMS1, FMS2 Frame Memory >Still >Freeze/Store page 390
FM1 to 8 signals assigned
buttons
Frame Memory >Still >Recall page 393
Color Bkgd1 signal assigned
button
Color Bkgd >Color Bkgd1 page 430
Color Bkgd2 signal assigned
button
Color Bkgd >Color Bkgd2
CCR1 signal assigned button CCR >CCR1 >XX page 455
CCR2 signal assigned button CCR >CCR2 >XX