Sony Mz-G750 - Holder Assy; Motor Flexible Board

10
MZ-G750/R700
3-7. HOLDER ASSY
2 Remove two solders of
DC motor (over write head up/down) (M603).
1 Remove four solders of
DC motor (sled) (M602).
3 Remove four solders of
DC motor (spindle) (M601).
DC motor (sled)
circular hole
5 motor flexible board
4 adhesive sheet
Note: Align a circular hole in the stripping paper
with a circular hole in the DC motor (sled),
when mounting the motor
flexible board.
3-8. MOTOR FLEXIBLE BOARD
4 Remove the holder assy to
direction of the arrow
B .
1 Open the holder assy.
A
2
B
3
boss