Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback. Group-related items
appear only when a track with group
settings is played.
HI/bbl
MENU/
ENTER
1
While the recorder is playing, press
MENU.
2
Press I44 or w repeatedly until
“DISP”
flashes in the display, and
then press ENTER again.
3
Press I44 or w repeatedly until
the information you want flashes in
the display.
Each time you press w, the display
changes as follows:
Display window on the
recorder
f
W~~~O)I
On 0
+ LapTim
The elapsed time of the current
track.
1
1 Rem
The remaining time of the current
track.
1
GP Rem
The remaining time after the current
locytion in the group.
L
Allhem
The remaining time after the current
location.
4 Press ENTER (ENTER).
The display changes as follows:
The information selected in step 3
appears in @ and 0.
@ - the information selected in step
7
o-
track number, track name,
group name, or disc name.
Note
Items may appear differently or may not be-- -- -
selectable, depending on the group mode’s on/
off status or the recorder’s operating
status.
.‘I’.
c
If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 32.
36-GB
To Next Page
Loading...
