Sony MZ-N520 - Main Board and Mechanism Deck Removal

8
MZ-N520/N520CK
3-3. LCD MODULE, BUTTON (CONTROL)
3-4. MAIN BOARD
3 three
screws
1 six screws
2 LCD module
Note: On installation, adjust the position of
both switch and knob (hold).
5 button (control)
4 open locker
knob (hold)
switch
case (upper) sub ass
y
8 MAIN board
6 battery terminal (–)
5 battery terminal board (+
)
2 flexible board (motor)
(CN701)
3 flexible board
(CN871)
7 flexible board (optical pick-up)
(CN501)
1 Remove two solders of the
flexible board (over write head).
4 four screws
(M1.4)