Sony MZ-NH600 - Turning off the Beep Sound; Storing the Settings for Individual Discs (Disc Memory)

53
Turning off the beep
sound
You can turn off/on the beep sound.
1 Enter the menu and select “Option” -
“Beep”.
2 Turn the jog dial until “Beep Off”
appears in the display, and then press
NENT to enter the selection.
To turn on the beep sound
Select “Beep On” in step 2.
Storing the settings for
individual discs (Disc
Memory)
The recorder is factory set to
automatically store settings for each disc.
The recorder automatically stores the
settings for a disc and retrieves them
whenever the disc is inserted.
The following setting can be stored:
• Bookmark
• “Custom1” and “Custom2” settings of
6-Band Equalizer
You can check the setting as follows.
1 Enter the menu and select “Option” -
“Disc Mem”.
2 Turn the jog dial until “On” appears
in the display, and then press NENT
to enter the selection.
To set the recorder so that
disc settings are not stored
Select “Off” in step 2.
Erasing the disc information
1 Insert the disc whose information is
to be erased and verify its contents.
2 Select “1MemErase” in step 2.
The disc information is erased.
z
“Disc Memory” appears when the disc with its
setting stored is inserted.
5-way control key (NENT)
NAVI/MENU
Jog dial
5-way control key (NENT)
NAVI/MENU
Jog dial