Sony MZ-NH700 - Page 43

43
2 Turn the jog dial repeatedly to select
the sound mode and then press
NENT to enter the selection.
Each time you turn the jog dial, A
changes as follows. When you press
NENT, B appears.
To modify and store the sound
You can modify the sound and store the
results in “Custom1” and “Custom2”.
1 While playing, enter the menu and
select “Sound” - “Sound EQ” -
“Custom1” or “Custom2”.
2 Press the 5-way control key towards
. or > to select the frequency.
3 Turn the jog dial to adjust the level.
4 After selecting the level, press
NENT to enter the selection.
To cancel the setting
Select “Normal” in step 1.
6-Band Equalizer will not function during
recording.
AB
Heavy SH
Pops SP
Jazz SJ
Unique SU
Custom1 S1
Custom2 S2
A
B
Level of the each frequency
(100 Hz - 10 kHz)
Note
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6 kHz, 4 kHz, 10 kHz
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB,
+10 dB