MZ-R55 manual Page 8 of 20
http://www.hip.atr.co.jp/~eaw/minidisc/mzr55_user_manual/manual.htm 2/9/99
If the playback does not start
Make sure the recorder is not locked. If it is locked, slide the HOLD switch in the opposite direction
of the arrow.
When using optional headphones
Use headphones with a stereo mini-plug. You cannot use headphones with a micro-plug.
Notes
l The sound may skip during playback when the recorder is exposed to continuous vibration, such
as while jogging.
l If the power supply is disrupted (i.e. the battery is removed or becomed exhausted or the A.C
power is disconnected) when the recorder is operating,the lid will not open until the power is
resotored.
Various ways of recording
Connecting digital and analog inputs
The recorder selects digital or analog input according to how the sound source is hooked up.
Input
Difference
Digital input Analog (line) input
Connectable
source
Equipment with an
jack
Equipment with an
analog (line) output jack
Usable cord Digital cable (with
an optical or an
optical mini-plug)
plugs or a stereo mini-
plug)
Signal from
the source
Digital Analog
Even when a digital
source (such as a CD) is
connected, the signal
sent to the recorder is
analog.
Recorded
track
numbers
Marked (copied)
automatically...
...at the same
Marked...
...after more than 2
seconds of silence.