44
Symptom
The sound has a lot of
static.
Cannot record/edit.
Cannot find the track
marks.
No sound comes
through the
headphones.
No clock display (”--
y--m--d” appears).
The recorded date
and time does not get
stamped.
The clock loses time.
Cause/Solution
•You are operating near a source of strong magnetism, such as
a TV.
b
Move the recorder away from the source of magnetism.
•Power was disrupted, or there was a blackout during
recording/editing.
b
The recording up to that point will be erased. Rerecord.
•You pressed P after pressing = or +.
b
Press P before pressing = or +.
•The volume is too low.
b
Adjust the volume by pressing VOL +/– (LEVEL on the
station).
•The clock has not been set.
b
Set the clock (page 19).
•The built-in battery for the clock is weak because the power
supply had been cut off for a period of time.
b
Charge the built-in battery by attaching the recorder to
the station and plugging the AC power adaptor to DC IN
9 V on the station and the wall outlet (page 19). Note that
the clock may gain or lose up to about 2 minutes per
month under normal condition.
To Next Page
Loading...
