17
MZ-G750/R700
4. When all the keys on the set and on the remote commander are
considered as OK, the following displays are shown for 4 sec-
onds.
Example1: When the keys on the set are considered as OK:
Example2: When the keys on the remote commander are con-
sidered as OK:
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back.
This set LCD display
0 00SET OK
: AD value of the remote commander Key
(hexadecimal OO to FF)
This set LCD display
0 00RMC OK
: AD value of the remote commander Key
(hexadecimal OO to FF)
To Next Page
Loading...
