Sony NSZ-GT1 Connection Guide

Sony NSZ-GT1 4-270-510-11 (1)
To connect the Internet TV
Box to an AV Receiver
The connection method varies depending on the AV Receiver you are using. Connect
your AV Receiver with the appropriate method. For details, see “Connecting Devices” in
“Connection” in the “Help Guide” (http://www.esupport.sony.com/internettv/helpguide/).
Refer also to the instruction manual supplied with the AV Receiver.
Method 1: AV Receiver with
an HDMI connection
Method 2: AV Receiver without an HDMI
connection
TV TV
AV Receiver
Internet TV Box
Cable/Satellite Box
Cable/Satellite Box
Internet TV Box AV Receiver
HDMI
cable
HDMI
cable
*HDMI
cable
*HDMI
cable
*HDMI
cable
IR Blaster
cable
IR Blaster
cable
IR Blaster cable
IR Blaster cable
*Optical digital cable
* Not supplied
* Not supplied
To enjoy the surround sound from your AV Receiver, connect
the Internet TV Box and the AV Receiver with an optical
digital cable, then press Fn + 1 on the remote and select
[Picture & sound] - [Audio output] - [Optical].
Note
When you make a connection with this method, the DTS-HD
and Dolby TrueHD surround sound are not available.

Sony NSZ-GT1 Specifications

Power

power requirements voltage	AC 120V
power requirements frequency	60Hz
power consumption in operation	43W

Inputs and Outputs

hdmi input	1 (Rear)
hdmi output	1 (Rear)
usb 2.0 ports	4 (3 Rear/1 Front)

Weight and Dimensions

dimensions	13 x 2.3 x 9.8 inches
weight	5.3 lbs
packaging dimensions	14.6 x 4.7 x 14.6 inches