The NFC function is turned on as a default. If you want to turn off the NFC function, tap the menu items in the following
order to remove the check mark.
– [Settings] – [NFC] ([Bluetooth]).
Hint
Take the following measures if the connection is poor.
Move the smartphone over the mark on the Walkman (
).
If the Walkman or the smartphone is inside a case, take it out of the case.
Make sure that the NFC function is on. Check if the N mark appears in the information area. If not, exit the Bluetooth Receiver
function, and then tap the menu items in the following order to turn on the NFC function.
– [Settings] – [NFC] ([Bluetooth]).
Note
Turn on the screen of the Walkman before you make the connection. If the screen is turned off, you cannot connect the
smartphone by touching the smartphone to the Walkman (NFC).
The battery life becomes considerably shorter when the Bluetooth Receiver function is active.
You cannot use the Bluetooth Receiver function while any of the following functions is active. Turn off the function and switch to
the Bluetooth Receiver function.
USB-DAC function
Related Topic
Turning the Walkman on or off
Connecting the Walkman to an unpaired smartphone for the first time
Connecting the Walkman to a paired smartphone
Configuring the Bluetooth function (Bluetooth receiving mode)
Notes on the Bluetooth function
4-593-855-13(1) Copyright 2016 Sony Corporation
The contents of the Help Guide may be subject to change without notice due to updates to the product's specifications.
To Next Page
Loading...
Need help?
General
