Sony SHAKE-X30D - Speaker System

71
GB
Additional Information
SHAKE-X70D/SHAKE-X30D/SHAKE-X10D.GB.4-691-054-12(1)
MPEG4:
File format: MP4 File Format
Video codec: MPEG4 Simple
Profile (AVC is not compatible.)
Bit rate: 4 Mbps
Resolution/Frame rate:
720 × 480, 30 fps
720 × 576, 25 fps (except for Latin
American model)
Audio codec: AAC-LC (HE-AAC is
not compatible.)
DRM: Not compatible
Speaker System
SSSHAKEX70
Speaker system:
3-way, Sound Pressure Horn
Speaker unit:
Woofers: 150 mm, cone type
Tweeters: 25 mm, horn type
Subwoofers: 380 mm, cone type
Rated impedance:
8 ohms
Dimensions (w/h/d) (Approx.):
510 mm × 773 mm × 491 mm
Mass (Approx.):
30.6 kg
SSSHAKEX30
Speaker system:
2-way, Sound Pressure Horn
Speaker unit:
Tweeters: 25 mm, horn type
Subwoofers: 250 mm, cone type
Rated impedance:
4 ohms
Dimensions (w/h/d) (Approx.):
368 mm × 585 mm × 391 mm
Mass (Approx.):
16.1 kg
SSSHAKEX10
Speaker system:
2-way, Sound Pressure Horn
Speaker unit:
Tweeters: 25 mm, horn type
Subwoofers: 200 mm, cone type
Rated impedance:
4 ohms
Dimensions (w/h/d) (Approx.):
315 mm × 490 mm × 388 mm
Mass (Approx.):
12 kg
General
Power requirements:
AC 120 V – 240 V, 50/60 Hz
Power consumption:
SHAKE-X70D: 375 W
SHAKE-X30D/SHAKE-X10D: 220 W
Power consumption (at the Power
Saving mode):
0.5 W (When “BT STBY” is set to
“OFF” and [CONTROL FOR HDMI]
is set to [OFF].)
3 W* (When “BT STBY” is set to
“ON” and [CONTROL FOR HDMI] is
set to [ON].)
Dimensions (w/h/d) (excl. speakers)
(Approx.):
455 mm × 165 mm × 330 mm
Mass (excl. speakers) (Approx.):
SHAKE-X70D: 6.2 kg
SHAKE-X30D/SHAKE-X10D: 5.8 kg
* The power consumption of the system
will be less than 0.5 W when there is no
HDMI connection and “BT STBY” is set
to “OFF”.
Design and specifications are subject
to change without notice.