Sony SVP-9020 - Page 21

Rear Panel (Continued)
[3] Optional accessory compartment (1) VIDEO OUT (output) connector (BNC
This compartment is used to install the SVBK- type)
100 or SVBK-120. Used to output a composite video signal.
| Note | [9] AC IN(input) connector and ground
Nothing can be installed here when optional terminal
accessory compartment (2) [4 jis being used.
4| Optional accessory compartment (2)
This compartment is used to install the SVBK-
130 or SVBK-140.
Nothing can be installed here when optional
accessory compartment (1) [3] is being used. L
@ ~ACIN
@ + terminal
chapter {IITHTITHTIIHII
AC IN connector and ground terminal
9} AUDIO MONITOR output connector @ ~ AC IN: Used to connect the player to an
(phono
jack)
-_
;
AC
power
outlet
with
the
supplied
AC
power
Used to output the audio signal selected with enna:
the MONITOR OUT CH-1/MEX/CH-2 selector @ + (ground) terminal: Used to connect a
on
the
front
panel.
ground
line.
[6] TV OUT (output) connector (8-pin)
Used to output the video and audio signal to a
video monitor having an 8-pin VTR connector.
The audio signal recorded onto the channel
selected with the MONITOR OUT selector is
output.
7} S VIDEO OUT (output) connector (4-pin
mini DIN)
Used to output the Y and C signals separately.
4 0(E) Chapter 2 Location and Function of Parts and Controls