Sony SVP-9020 - Page 38

captor {ITIITHTIHHHII
1-10(E)
Repeated Playback of a Desired Portion (Continued)
BPs Be gis ES SRE arn ES EU PCE ESR ig cca SE AE aE gh Ea eras AU ee Sey Sat RE AE sa ges NOR te wae La ae aa
Chapter 4 Playback
To check the time between two particular points specified for repeat
playback
1 Press the STOP button.
2 Set the PROGRAMMED OPERATION selector to <3.
3 Press the MARK IN A and MARK IN B buttons simultaneously.
The time between the specified points will appear on the time counter while
the buttons are held down.
® When the RESET button is pressed while the PROGRAMMED OPERATION
selector is set to OFF or --'«., data is erased from memory and “0:00:00” is set for
both buttons.
© The most recently set values for the MARK IN A and B buttons, as well as the
most recently set time counter value are maintained, even if the power is turned
off. If, however, you perform a memorizing operation and turn off the power
within 15 seconds of the power being turned on, the newly registered data will be
lost.
© You can memorize only one point for each MARK IN A or B button. If the button
is pressed several times, only the last point will be memorized.