Sony TA-E1000ESD - Page 13

The RM-P1000 can “learn” various functions of other
remote commanders which use infrared rays. When the
mode selector is set to SONY STD(Sony standard), buttons
on the RM-P1000 can be used to perform the functions
below:
[1] LEARN indicator
[2] Mode selector
SONY STD :To operate the commander on Sony
standard.
USER STD :To use the learned functions.
LEARN : To learn other functions.
(3] AC OUTLET CONTROLLER buttons
These buttons does not operate with this unit.
[4] CD player/video disc player operation buttons
CD/VDP _ : Selects the unit to be operated.
> : Play
i : Pause
a : Stop
Ke<@, BPI; AMS (Automatic Music Sensor)
<<, Ps: Search
{5] TAPE/VTR operation buttons
TAPE/VTR : Selects the unit to be operated.
> : Play
| : Pause
a : Stop
<< : Rewind
>> : Fast forward
e : Recording(Press both buttons for
recording.)
Following buttons can be used when the TAPE/VTR
selector is set to VTR.
DUAL : Selects bilingual programs.
ANT TV/VTR _ :Selects output signal from the antenna
terminal on the VTR.
CH +/— : Selects a higher or lower preset
channel.
VTR selector :Selects VTR 1, 2, or 3.
[6] Input function buttons
Soundfield program buttons
Parameter control buttons
MAIN PARAMETER select button
SUB PARAMETER select button
EQUALIZER BAND select button
EQUALIZER SLOPE select button
DIGITAL PROCESSING CONTROL buttons
Work as DIGITAL PROCESSING CONTROL knobs
on the unit.
Digital sound processing buttons
PARAMETRIC EQ on/off button
DYNAMICS on/off button
SURROUND on/off button
DISPLAY buttons
DISPLAY MODE button
DIMMER button
[i] RESET button
{12} Dolby surround buttons
PRO LOGIC MODE button
TEST TONE button
[13] PROGRAM CLEAR button
Clears all programmed signals.
{14} POWER buttons
POWER : Turns on and off the TA-E1000ESD.
TV POWER _:Turns on and off the TV.
VTR POWER: Turns on and off the VTR selected by the
VTR selector switch. (usable only when
the TAPE/VTR selector is set to VTR).
VDP POWER: Turns on and off the video disc player.
[is] Tuner operation buttons
BAND ‘Selects the frequency band.
PRESET +/- :Selects a higher or lower preset number.
TV operation button
TV/VIDEO _ :Selects the input to the TV
VOL +/- :Adjusts the volume.
CH +/- :Selects a higher or lower preset channel.
[7] Volume contro! buttons
MASTER VOL +/- : Adjusts the level from LINE OUT and
HEADPHONES jacks.
REAR VOL +/- _: Adjusts the level of the rear
speakers.
CENTER VOL +/- : Adjusts the level of the center
speaker.
MUTING : Mutes the output signal.