Sony TC-K511S - Record Muting

REC MUTE
Inserting a Blank Space
During Recording
— Record Muting
The Record Muting function allows you to
insert a four-second blank to enable proper
Multi-AMS operation (see page 9), and to
replace unwanted input with a blank of any
desired length.
1 while recording, press O and release
it immediately.
The REC indicator starts flashing.
During this time, no incoming signals are
recorded on the tape.
After four seconds, the IE indicator lights
up and the unit enters recording pause
mode.
2 Press Ito resume recording.
To create a blank longer than four
seconds
Press the O button for the desired length of
time. After four seconds, the REC indicator
flashes with greater rapidity. When you
release the © button, the Hl indicator lights
up and the unit goes into recording pause
mode.
Press the H button to resume recording.