Sony TC-K611S - Locating a Desired Playback Position - Memory Play; The Accuracy of the Digital Linear Counter

Locating a Desired Playback Position
— Memory Play
How to Memorize a
Position
cate a Desired Playback
The Memory Play function allows you to use the counter to
record a desired position on a cassette for fast relocation and
automatic playback later.
1 Press MEMORY to activate the Memory Play
function.
RESET MEMORY
OO
MEMORY
7
tru
2 Press RESET to reset the counter at the
desired position.
The desired position is memorized.
RESET MEMORY
oO ve
3 While pressing > , press << to return to the
desired position.
10
Returning to the memorized position in stop mode
— Memory Stop
If you press only the <4 button when the MEMORY
indicator is on in the stop mode, the tape rewinds and the
unit stops when the counter reaches 0.00.
Be sure to first stop playback before activating the Memory
Stop function, otherwise the Multi-AMS function will activate.
To deactivate the Memory Play function
Press the MEMORY button, turning off the MEMORY
indicator.
Note on Memory Play/Stop
In actuality, the tape is rewound to slightly short of 0.00.
Do not turn off the power while using the counter
Turning the power off, then on again resets the counter to
0.00.
The Accuracy of the Digital Linear Counter
Since the counter is not a digital clock, the number will differ
from the actual elapsed playback or recording time by a few
minutes, depending on such factors as tape length and hub
size.