Sony TC-K611S - Erase Head, Torque, and Force Measurements

Chapter 3 Recording
aiTefo) fol late)
How to Record to a Cassette
Follow this procedure to record a source on a cassette.
3
_
1 Insert a cassette with the side to be recorded
facing outward.
(Refer to pages 14 to 15 to calibrate the bias
current and recording level if desired.)
OPEN/CLOSE
a
2 Set DOLBY NR.
DOLBY NR
* .B
oS
0S
3 Press @ to enter the recording pause mode.
REC
4 Play the program source to be recorded.
5 Turn REC LEVEL to adjust the recording level.
REC LEVEL
sae
See “Adjusting the Recording Level” on page 13.
6 Turn BALANCE to adjust the balance.
BALANCE
7 Restart the program source, if required.
8 Press II or B to start recording.
cm
PAUSE
To stop recording
Press the lf button.
14