Sony TC-K611S - Specifications

Specifications
Recording system 4-track 2-channel stereo General
Fast winding time Approx. 90 sec. (with Sony C-60 Power requirements Model for the U.S.A.:
cassette) 120 V AC, 60 Hz
Bias AC bias Models for the United Kingdom and
Heads Erasing head x 1 (F&F head) Australia:
Recording head x 1 (SD head) 240 V AC, 50 Hz
Playback head x 1 (SD head) Power consumption 21W
Motors Capstan motor x 1 (DC servo motor) Dimensions Approx. 430 x 123 x 306 mm (w/h/d)
Reel motor x 1 (DC motor) (17 x 4% x 11% inches)
Assist (mechanism drive) motor x 1 including projecting parts and controls
(DC motor} Mass Approx. 4.8 kg (10 lbs 10 0z)
Signal-to-noise ratio (at peak level and weighted) Supplied accessories
Cassette
Type
IV
:
Type
Il
Type
|
Audio
connecting
cords
(2)
Dolby NR off
ee 61 dB 59 dB 57 dB Design and specifications are subject to change without
are A notice.
S/N ratio improvement (approximate values)
With Dolby B NR on : 5 dB at 1 kHz; 10 dB at 5 kHz Note
With Dolby C NR on: 15 dB at 500 Hz; 20 dB at 1 kHz
Thi: li ith Directi
With Dolby $ NR on : 40 dB at 100 Hz. 24 dB at 1 kHz is appliance conforms with EEC Directive 87/308/EEC
regarding interference suppression.
Harmonic distortion 0.4% (with Type |, 160 nWb/m,
315 Hz, 3rd H.D.)
1.5% (with Type 1V, 250 nWb/m,
315 Hz, 3rd H.D.)
Frequency response (Dolby NR off)
20 - 20,000 Hz (+3 dB, IEC)
Type IV cassette 20 - 16,000 Hz [+3 dB (-4dB
recording)}
ea
Type Il cassette 20 - 18,000 Hz (+3 dB, IEC)
Type | cassette [20 - 17,000 Hz (+3 dB, IEC)
Type IV : Sony METAL-S or ES-IV
Type ll : Sony UX-S or UX
Type! : Sony HF-S
Wow and flutter +0.09% W.Peak (IEC)
0.05% W.RMS (NAB)
+0.14% W.Peak (DIN)
Inputs
Line inputs Sensitivity 0.16 V
phone FaCKS) Input impedance | 47 k ohms |
Outputs
Line outputs Rated output |0.5 V at a load
(phono jacks) level impedance of
47 k ohms
roae Over 10 k ohms
impedance
Headphones Output level [0-3 mW ata load
(stereo phone jack) impedance of
32 ohms
18