Sony TC-K611S - SECTION 2 DISASSEMBLY

Hooking Up the System
fore You Begin
* Turn off the power to all equipment to be connected before
making any connection.
« Note that the red plug of the supplied connecting cord is for
tight-channel (R) connection and the white plug for left-
channel (L) connection.
* The connecting cords should be fully inserted into the jacks.
A loose connection may cause hum pickup.
Hook-up Example
at Signal flow
LINE IN
TC-K611S
to an AC outlet
for { for
recording playback
Amplifier
lee ogeseace S—
(_\
REC OUT TAPE INPUT
to a wall outlet
White
L_Ce=
R=
Red
aiexeL. Ge] Miolami-lel-melelele)iare)
aa Signal flow
LINE IN
TC-K611S
to a wall outlet
li from another
to another I
tape deck tape deck
Another tape deck
LINE IN to an AC outlet