Sony TC-K890ES - Panel Section

pees
Locating a Desired Playback Position
— Memory Play
How to memorize and locate a desired playback
position
The Memory Play function allows you to use the counter to
record a desired position on a cassette for fast relocation and
automatic playback later.
1 Press MEMORY to activate the Memory Play
function.
2 Press RESET to reset the counter at the
desired position.
The desired position is memorized.
RESET
3 While pressing B> , press <€4 to return to the
desired position.
Returning to the memorized position in stop mode
— Memory Stop
If you press only the <4 button when the MEMORY
indicator is on in the stop mode, the tape rewinds and the
unit stops when the counter reaches 0.00.
To deactivate the Memory Play function
Press the MEMORY button, aa off the MEMORY
indicator.
Note on Memory Play/Stop
In actuality, the tape is rewound to slightly short of 0.00.
Do not turn off the power while using the counter
Turning the power off, then on again resets the counter to
0.00.
The Accuracy of the Linear Counter
Since the counter is not a digital clock, the number will differ
from the actual elapsed playback or recording time by a few
minutes, depending on such factors as tape length and hub
size,