Sony TC-WE475 - Page 39

2
TC-WE475
• CHANGED ELECTRICAL PARTS LIST
MAIN (Service manual see page 32 to 36)
Ref.No. FORMER TYPE NEW TYPE
A-2007-860-A MAIN BOARD, COMPLETE (US,CND,SP,AUS) A-4730-003-A MAIN BOARD, COMPLETE (US,CND)
A-2007-862-A MAIN BOARD, COMPLETE (AEP,UK) A-4730-041-A MAIN BOARD, COMPLETE (AEP,UK)
******************* A-4730-107-A MAIN BOARD, COMPLETE (SP)
A-4730-108-A MAIN BOARD, COMPLETE (AUS)
********************
____________________ SWSP BOARD (SP)
****************
CN005
____________________
1-564-321-11 PIN, CONNECTOR(3.96MM PITCH)2P (SP)
* CN006
____________________
1-564-687-11 PIN, CONNECTOR(3.96MM PITCH)3P (SP)
CN007
____________________
1-568-106-11 PIN, CONNECTOR(3.96MM PITCH)4P (SP)
0S1
____________________
1-572-009-11 SELECTOR, VOLTAGE (VOLTAGE SELECTOR) (SP)
PANEL (Service manual see page 36)
Ref.No. FORMER TYPE NEW TYPE
A-2007-861-A PANEL BOARD, COMPLETE (US,CND) A-4730-001-A PANEL BOARD, COMPLETE (US,CND,AUS)
A-2007-863-A PANEL BOARD, COMPLETE (AEP,UK) A-4730-042-A PANEL BOARD, COMPLETE (AEP,UK)
A-2007-864-A PANEL BOARD, COMPLETE (SP) A-4730-044-A PANEL BOARD, COMPLETE (SILVER) (AEP)
A-2007-865-A PANEL BOARD, COMPLETE (AEP) A-4730-045-A PANEL BOARD, COMPLETE (SP)
A-2007-872-A PANEL BOARD, COMPLETE (AUS) ********************
********************
(TRANS (A), TRANS (B), DIRECTION, H.P, POWER, RECVOL ( DIRECTION, H.P, POWER, REC, VOL BOARD are included.)
BOARD are included.)
TRANS(A) (Service manual see page 36)
Ref.No. FORMER TYPE NEW TYPE
(TRANS (A) board is included in PANEL board) 1-685-973-12 TRANS (A) BOARD (EXCEPT SP)
**************
CN002 *1-568-226-11 PIN, CONNECTOR 2P (EXCEPT SP) 1-564-321-11 PIN, CONNECTOR(3.96MM PITCH)2P (EXCEPT SP)
* CN003
____________________
1-580-230-11 PIN, CONNECTOR (PC BOARD) 2P (EXCEPT SP)
TRANS(B) (Service manual see page 36)
Ref.No. FORMER TYPE NEW TYPE
(TRANS (B) board is included in PANEL board) 1-685-974-12 TRANS (B) BOARD
*************
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une
piéce portant le numéro spécifié.