Sony Trinitron PVM-14L2 - Picture Tube, Bezel Assy and X Board Removal (20 Inch)

1-14
PVM-14L2/20L2
1-4-8. Picture Tube, Bezel Assy and X Board Removal (20 inch)
6 C board
7
Deflection yoke
1
Anode cap
4 B block assy
3
Two screws
(+PS 4x8)
0
Screw
(+BVTT 4x8)
8
Screw
(+PS 4x8)
!=
Two tapping (ST) screws (5) ![ Two tapping (ST) screws (5)
9 Screw
(+BVTT 4x8)
2 G, Q block assy
Cushion
Cushion
!- Prepare a work bench on the protection sheet
and place the CRT and bezel assembly on the
work bench.
!]
Remove the bezel assy
in the direction of the arrow B.
Bench
!\ Remove the CRT shield assy
in the direction of the arrow A.
!;
Picture tube
!, X board
!'
Tally cushion
Note:
Prepare a work bench that can protect surface
of CRT and can withstand the weight of the CRT.
B
B
A
5
Fastening band
assy